Skip to content
Send an enquiry

1.4404 as precision strip

1.4404 is an austenitic chromium-nickel steel with 2 to 2.5 % molybdenum and low carbon. The molybdenum makes it more resistant to chlorides than 1.4301. The low carbon content reduces the tendency towards chromium carbide precipitation and thus the risk of intergranular corrosion after welding, especially in the heat-affected zone.

Data on 1.4404

CharacteristicDetail
Material number1.4404
Short nameX2CrNiMo17-12-2
AISI316L
Microstructureaustenitic
StandardEN 10088-2
Main constituentsChromium 16.5 to 18.5 %, nickel 10.0 to 13.0 %, molybdenum 2.0 to 2.5 %, carbon max. 0.03 %
In-house abbreviationK316L
Full composition in the comparison table

1.4404 at R. Kretzschmann GmbH

CharacteristicRange
Surface2R, 2H, 2B, EDT
Width2 to 1,250 mm
Edgeslit or deburred
Form of supplySingle coil, traverse-wound spool up to 1,500 kg or cut-to-length sheet up to 6,000 mm in length

Related grades

1.4301 has no molybdenum and is correspondingly lower in alloy surcharge. 1.4571 is stabilised with titanium instead of low carbon. 1.4435, with somewhat more nickel and molybdenum, is also classed as 316L.

1.4404 is also the material in our calculation example for the spool.

Alloy surcharge 1.4404

You will find the current alloy surcharge for 1.4404 in our monthly list.

To the alloy surcharges

1.4404 in your dimensions

Enquire about 1.4404