Skip to content
Send an enquiry

Stainless steel precision strip

Precision strip is cold-rolled stainless steel strip with tight limits on thickness, width and strength. It is stamped, bent or deep-drawn, often in lines that run continuously. For this, every strip must match the one before.

Precision strip range

CharacteristicRange
Thickness0.01 to 1.00 mm
Width2 to 1,250 mm
Surface2R, 2H, 2B, EDT
Edgeslit or deburred
Form of supplyCoil, traverse-wound spool up to 1,500 kg or cut-to-length sheet up to 6,000 mm in length
Materialsferritic, austenitic, martensitic, duplex, others on request
Coil inner diameter50, 80, 150, 300, 400, 500 mm
Single coil dimensionsto your specification
Minimum quantitydepending on material and thickness, delivery from 1 kg
Tolerancesto EN ISO 9445-1
Certificateinspection certificate 3.1 to EN 10204 on request

Which thickness is available in which width depends on grade and strength. Enquire about your dimensions.

Surfaces

2R is bright annealed and glossy. 2B is annealed, pickled and lightly skin-passed; the surface is matt and smooth. 2H is work-hardened, that is rolled once more after annealing and therefore stronger. EDT is electrical discharge textured (Electrical Discharge Texturing). The surface is particularly rough, with a mean roughness Ra of over 0.50 µm.

Stainless steel coils in various widths, six standing on holders and two lying down

Edges

The slit edge is the edge as it comes from the slitting line. It is sufficient for most stamped and bent parts. On the deburred edge the cutting burr has been removed. This protects guides and tools and is safer when the strip is handled by hand.

Where precision strip is used

Our customers come from the automotive industry, medical technology, electronics and contact technology, and mechanical engineering.

Looking for a different dimension

Tell us the material, thickness, width and quantity. We will check what we can slit from stock or source.

Request precision strip